#include <pcl/surface/3rdparty/opennurbs/opennurbs_beam.h>

Inheritance diagram for ON_Extrusion:

Public Member Functions
	ON_Extrusion ()
	ON_Extrusion (const ON_Extrusion &src)
	~ON_Extrusion ()
ON_Extrusion &	operator= (const ON_Extrusion &)
ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const
void	Dump (ON_TextLog &) const
unsigned int	SizeOf () const
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const
ON_BOOL32	Write (ON_BinaryArchive &binary_archive) const
ON_BOOL32	Read (ON_BinaryArchive &binary_archive)
ON::object_type	ObjectType () const
int	Dimension () const
ON_BOOL32	GetBBox (double boxmin, double boxmax, int bGrowBox=false) const
bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const
ON_BOOL32	Transform (const ON_Xform &xform)
ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
ON_Brep *	BrepForm (ON_Brep *brep, bool bSmoothFaces) const
ON_SumSurface *	SumSurfaceForm (ON_SumSurface *sum_surface) const
bool	GetBrepFormComponentIndex (ON_COMPONENT_INDEX extrusion_ci, ON_COMPONENT_INDEX &brep_ci) const
bool	GetBrepFormComponentIndex (ON_COMPONENT_INDEX extrusion_ci, double extrusion_profile_parameter, const ON_Brep &brep_form, ON_COMPONENT_INDEX &brep_ci) const
ON_BOOL32	SetDomain (int dir, double t0, double t1)
ON_Interval	Domain (int dir) const
ON_BOOL32	GetSurfaceSize (double width, double height) const
int	SpanCount (int dir) const
ON_BOOL32	GetSpanVector (int dir, double *span_vector) const
ON_BOOL32	GetSpanVectorIndex (int dir, double t, int side, int span_vector_index, ON_Interval span_interval) const
int	Degree (int dir) const
ON_BOOL32	GetParameterTolerance (int dir, double t, double tminus, double tplus) const
ISO	IsIsoparametric (const ON_Curve &curve, const ON_Interval *curve_domain=NULL) const
ON_BOOL32	IsPlanar (ON_Plane *plane=NULL, double tolerance=ON_ZERO_TOLERANCE) const
ON_BOOL32	IsClosed (int) const
ON_BOOL32	IsPeriodic (int) const
bool	GetNextDiscontinuity (int dir, ON::continuity c, double t0, double t1, double t, int hint=NULL, int *dtype=NULL, double cos_angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE_COSINE, double curvature_tolerance=ON_SQRT_EPSILON) const
bool	IsContinuous (ON::continuity c, double s, double t, int *hint=NULL, double point_tolerance=ON_ZERO_TOLERANCE, double d1_tolerance=ON_ZERO_TOLERANCE, double d2_tolerance=ON_ZERO_TOLERANCE, double cos_angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE_COSINE, double curvature_tolerance=ON_SQRT_EPSILON) const
ISO	IsIsoparametric (const ON_BoundingBox &bbox) const
ON_BOOL32	Reverse (int dir)
ON_BOOL32	Transpose ()
ON_BOOL32	Evaluate (double u, double v, int num_der, int array_stride, double der_array, int quadrant=0, int hint=0) const
ON_Curve *	IsoCurve (int dir, double c) const
ON_BOOL32	Trim (int dir, const ON_Interval &domain)
bool	Extend (int dir, const ON_Interval &domain)
ON_BOOL32	Split (int dir, double c, ON_Surface &west_or_south_side, ON_Surface &east_or_north_side) const
bool	GetClosestPoint (const ON_3dPoint &P, double s, double t, double maximum_distance=0.0, const ON_Interval sdomain=0, const ON_Interval tdomain=0) const
ON_BOOL32	GetLocalClosestPoint (const ON_3dPoint &, double, double, double , double , const ON_Interval =NULL, const ON_Interval =NULL) const
int	GetNurbForm (ON_NurbsSurface &nurbs_surface, double tolerance=0.0) const
int	HasNurbForm () const
bool	GetSurfaceParameterFromNurbFormParameter (double nurbs_s, double nurbs_t, double surface_s, double surface_t) const
bool	GetNurbFormParameterFromSurfaceParameter (double surface_s, double surface_t, double nurbs_s, double nurbs_t) const
void	Destroy ()
bool	SetPath (ON_3dPoint A, ON_3dPoint B)
bool	SetPathAndUp (ON_3dPoint A, ON_3dPoint B, ON_3dVector up)
int	PathParameter () const
ON_3dPoint	PathStart () const
ON_3dPoint	PathEnd () const
ON_3dVector	PathTangent () const
bool	SetMiterPlaneNormal (ON_3dVector N, int end)
void	GetMiterPlaneNormal (int end, ON_3dVector &N) const
int	IsMitered () const
bool	IsSolid () const
int	IsCapped () const
int	CapCount () const
ON_DEPRECATED int	FaceCount () const
bool	GetProfileTransformation (double s, ON_Xform &xform) const
bool	GetProfilePlane (double s, ON_Plane &plane) const
bool	GetPathPlane (double s, ON_Plane &plane) const
bool	SetOuterProfile (ON_Curve *outer_profile, bool bCap)
bool	AddInnerProfile (ON_Curve *inner_profile)
int	ProfileCount () const
int	ProfileSmoothSegmentCount (int profile_index) const
int	ProfileParameter () const
const ON_Curve *	Profile (int profile_index) const
ON_Curve *	Profile3d (int profile_index, double s) const
ON_Curve *	Profile3d (ON_COMPONENT_INDEX ci) const
ON_Curve *	WallEdge (ON_COMPONENT_INDEX ci) const
ON_Surface *	WallSurface (ON_COMPONENT_INDEX ci) const
ON_LineCurve *	PathLineCurve (ON_LineCurve *line_curve) const
int	ProfileIndex (double profile_parameter) const
const ON_PolyCurve *	PolyProfile () const
int	GetProfileCurves (ON_SimpleArray< const ON_Curve * > &profile_curves) const
int	GetProfileKinkParameters (int profile_index, ON_SimpleArray< double > &profile_kink_parameters) const
bool	ProfileIsKinked (int profile_index) const
Public Member Functions inherited from ON_Surface
void	DestroyRuntimeCache (bool bDelete=true)
	ON_Surface ()
	ON_Surface (const ON_Surface &)
ON_Surface &	operator= (const ON_Surface &)
virtual	~ON_Surface ()
bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const
virtual ON_Surface *	DuplicateSurface () const
ON_BOOL32	HasBrepForm () const
ON_BOOL32	GetDomain (int dir, double t0, double t1) const
bool	SetDomain (int dir, ON_Interval domain)
bool	IsSphere (ON_Sphere *sphere=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsCylinder (ON_Cylinder *cylinder=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsCone (ON_Cone *cone=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsTorus (ON_Torus *torus=NULL, double tolerance=ON_ZERO_TOLERANCE) const
virtual ON_BOOL32	IsSingular (int) const
bool	IsAtSingularity (double s, double t, bool bExact=true) const
int	IsAtSeam (double s, double t) const
ON_3dPoint	PointAt (double, double) const
ON_3dVector	NormalAt (double, double) const
ON_BOOL32	FrameAt (double u, double v, ON_Plane &frame) const
ON_BOOL32	EvPoint (double u, double v, ON_3dPoint &point, int quadrant=0, int *hint=0) const
ON_BOOL32	Ev1Der (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, int quadrant=0, int *hint=0) const
ON_BOOL32	Ev2Der (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &duu, ON_3dVector &duv, ON_3dVector &dvv, int quadrant=0, int *hint=0) const
ON_BOOL32	EvNormal (double u, double v, ON_3dPoint &point, ON_3dVector &normal, int quadrant=0, int *hint=0) const
ON_BOOL32	EvNormal (double u, double v, ON_3dVector &normal, int quadrant=0, int *hint=0) const
ON_BOOL32	EvNormal (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &normal, int=0, int *=0) const
ON_NurbsSurface *	NurbsSurface (ON_NurbsSurface pNurbsSurface=NULL, double tolerance=0.0, const ON_Interval s_subdomain=NULL, const ON_Interval *t_subdomain=NULL) const
void	DestroySurfaceTree ()
Public Member Functions inherited from ON_Geometry
	ON_Geometry ()
	ON_Geometry (const ON_Geometry &)
ON_Geometry &	operator= (const ON_Geometry &)
virtual	~ON_Geometry ()
ON_BoundingBox	BoundingBox () const
ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const
ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const
ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Translate (const ON_3dVector &translation_vector)
ON_BOOL32	Scale (double scale_factor)
virtual void	ClearBoundingBox ()
virtual bool	IsDeformable () const
virtual bool	MakeDeformable ()
virtual ON_BOOL32	SwapCoordinates (int i, int j)
virtual ON_COMPONENT_INDEX	ComponentIndex () const
Public Member Functions inherited from ON_Object
bool	CopyFrom (const ON_Object *src)
	ON_Object ()
	ON_Object (const ON_Object &)
ON_Object &	operator= (const ON_Object &)
virtual	~ON_Object ()
void	EmergencyDestroy ()
virtual void	MemoryRelocate ()
ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const
virtual ON_UUID	ModelObjectId () const
bool	SetUserString (const wchar_t key, const wchar_t string_value)
int	SetUserStrings (int count, const ON_UserString *user_strings, bool bReplace)
bool	GetUserString (const wchar_t *key, ON_wString &string_value) const
int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const
int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const
int	UserStringCount () const
ON_BOOL32	AttachUserData (ON_UserData *pUserData)
ON_BOOL32	DetachUserData (ON_UserData *pUserData)
ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const
void	PurgeUserData ()
ON_UserData *	FirstUserData () const
void	TransformUserData (const ON_Xform &xform)
void	CopyUserData (const ON_Object &source_object)
void	MoveUserData (ON_Object &source_object)

Static Public Member Functions
static bool	IsValidPolyCurveProfile (const ON_PolyCurve &polycurve, ON_TextLog *text_log=0)
static bool	CleanupPolyCurveProfile (ON_PolyCurve &polycurve)
static ON_Extrusion *	Cylinder (const ON_Cylinder &cylinder, bool bCapBottom, bool bCapTop, ON_Extrusion *extrusion=0)
static ON_Extrusion *	Pipe (const ON_Cylinder &cylinder, double other_radius, bool bCapBottom, bool bCapTop, ON_Extrusion *extrusion=0)
static ON_Extrusion *	CreateFrom3dCurve (const ON_Curve &curve, const ON_Plane plane, double height, bool bCap, ON_Extrusion extrusion=0)

Public Attributes
ON_Line	m_path
ON_Interval	m_t
ON_3dVector	m_up
int	m_profile_count
ON_Curve *	m_profile
bool	m_bCap [2]
bool	m_bHaveN [2]
ON_3dVector	m_N [2]
ON_Interval	m_path_domain
bool	m_bTransposed

Static Public Attributes
static const double	m_Nz_min
static const double	m_path_length_min

Additional Inherited Members
Public Types inherited from ON_Surface
enum	ISO { not_iso = 0, x_iso = 1, y_iso = 2, W_iso = 3, S_iso = 4, E_iso = 5, N_iso = 6, iso_count = 7 }

Detailed Description

Definition at line 36 of file opennurbs_beam.h.

Constructor & Destructor Documentation

ON_Extrusion::ON_Extrusion ( )

ON_Extrusion::ON_Extrusion ( const ON_Extrusion & src )

ON_Extrusion::~ON_Extrusion ( )

Member Function Documentation

bool ON_Extrusion::AddInnerProfile ( ON_Curve * inner_profile )

ON_Brep* ON_Extrusion::BrepForm ( ON_Brep * brep = NULL ) const

virtual

Reimplemented from ON_Surface.

ON_Brep* ON_Extrusion::BrepForm	(	ON_Brep *	brep,
		bool	bSmoothFaces
	)		const

int ON_Extrusion::CapCount ( ) const

static bool ON_Extrusion::CleanupPolyCurveProfile ( ON_PolyCurve & polycurve )

static

static ON_Extrusion* ON_Extrusion::CreateFrom3dCurve	(	const ON_Curve &	curve,
		const ON_Plane *	plane,
		double	height,
		bool	bCap,
		ON_Extrusion *	extrusion = `0`
	)

static

static ON_Extrusion* ON_Extrusion::Cylinder	(	const ON_Cylinder &	cylinder,
		bool	bCapBottom,
		bool	bCapTop,
		ON_Extrusion *	extrusion = `0`
	)

static

ON__UINT32 ON_Extrusion::DataCRC ( ON__UINT32 current_remainder ) const

virtual

Reimplemented from ON_Object.

int ON_Extrusion::Degree ( int dir ) const

virtual

Implements ON_Surface.

void ON_Extrusion::Destroy ( )

int ON_Extrusion::Dimension ( ) const

virtual

Implements ON_Geometry.

ON_Interval ON_Extrusion::Domain ( int dir ) const

virtual

Implements ON_Surface.

void ON_Extrusion::Dump ( ON_TextLog & ) const

virtual

Reimplemented from ON_Object.

ON_BOOL32 ON_Extrusion::Evaluate	(	double	u,
		double	v,
		int	num_der,
		int	array_stride,
		double *	der_array,
		int	quadrant = `0`,
		int *	hint = `0`
	)		const

virtual

Implements ON_Surface.

bool ON_Extrusion::Extend	(	int	dir,
		const ON_Interval &	domain
	)

virtual

Reimplemented from ON_Surface.

ON_DEPRECATED int ON_Extrusion::FaceCount ( ) const

ON_BOOL32 ON_Extrusion::GetBBox	(	double *	boxmin,
		double *	boxmax,
		int	bGrowBox = `false`
	)		const

virtual

Implements ON_Geometry.

bool ON_Extrusion::GetBrepFormComponentIndex	(	ON_COMPONENT_INDEX	extrusion_ci,
		ON_COMPONENT_INDEX &	brep_ci
	)		const

bool ON_Extrusion::GetBrepFormComponentIndex	(	ON_COMPONENT_INDEX	extrusion_ci,
		double	extrusion_profile_parameter,
		const ON_Brep &	brep_form,
		ON_COMPONENT_INDEX &	brep_ci
	)		const

bool ON_Extrusion::GetClosestPoint	(	const ON_3dPoint &	P,
		double *	s,
		double *	t,
		double	maximum_distance = `0.0`,
		const ON_Interval *	sdomain = `0`,
		const ON_Interval *	tdomain = `0`
	)		const

ON_BOOL32 ON_Extrusion::GetLocalClosestPoint	(	const ON_3dPoint &	,
		double	,
		double	,
		double *	,
		double *	,
		const ON_Interval *	= `NULL`,
		const ON_Interval *	= `NULL`
	)		const

void ON_Extrusion::GetMiterPlaneNormal	(	int	end,
		ON_3dVector &	N
	)		const

bool ON_Extrusion::GetNextDiscontinuity	(	int	dir,
		ON::continuity	c,
		double	t0,
		double	t1,
		double *	t,
		int *	hint = `NULL`,
		int *	dtype = `NULL`,
		double	cos_angle_tolerance = `ON_DEFAULT_ANGLE_TOLERANCE_COSINE`,
		double	curvature_tolerance = `ON_SQRT_EPSILON`
	)		const

virtual

Reimplemented from ON_Surface.

int ON_Extrusion::GetNurbForm	(	ON_NurbsSurface &	nurbs_surface,
		double	tolerance = `0.0`
	)		const

virtual

Reimplemented from ON_Surface.

bool ON_Extrusion::GetNurbFormParameterFromSurfaceParameter	(	double	surface_s,
		double	surface_t,
		double *	nurbs_s,
		double *	nurbs_t
	)		const

virtual

Reimplemented from ON_Surface.

ON_BOOL32 ON_Extrusion::GetParameterTolerance	(	int	dir,
		double	t,
		double *	tminus,
		double *	tplus
	)		const

virtual

Reimplemented from ON_Surface.

bool ON_Extrusion::GetPathPlane	(	double	s,
		ON_Plane &	plane
	)		const

int ON_Extrusion::GetProfileCurves ( ON_SimpleArray< const ON_Curve * > & profile_curves ) const

int ON_Extrusion::GetProfileKinkParameters	(	int	profile_index,
		ON_SimpleArray< double > &	profile_kink_parameters
	)		const

bool ON_Extrusion::GetProfilePlane	(	double	s,
		ON_Plane &	plane
	)		const

bool ON_Extrusion::GetProfileTransformation	(	double	s,
		ON_Xform &	xform
	)		const

ON_BOOL32 ON_Extrusion::GetSpanVector	(	int	dir,
		double *	span_vector
	)		const

virtual

Implements ON_Surface.

ON_BOOL32 ON_Extrusion::GetSpanVectorIndex	(	int	dir,
		double	t,
		int	side,
		int *	span_vector_index,
		ON_Interval *	span_interval
	)		const

virtual

Reimplemented from ON_Surface.

bool ON_Extrusion::GetSurfaceParameterFromNurbFormParameter	(	double	nurbs_s,
		double	nurbs_t,
		double *	surface_s,
		double *	surface_t
	)		const

virtual

Reimplemented from ON_Surface.

ON_BOOL32 ON_Extrusion::GetSurfaceSize	(	double *	width,
		double *	height
	)		const

virtual

Reimplemented from ON_Surface.

bool ON_Extrusion::GetTightBoundingBox	(	ON_BoundingBox &	tight_bbox,
		int	bGrowBox = `false`,
		const ON_Xform *	xform = `0`
	)		const

virtual

Reimplemented from ON_Geometry.

int ON_Extrusion::HasNurbForm ( ) const

virtual

Reimplemented from ON_Surface.

int ON_Extrusion::IsCapped ( ) const

ON_BOOL32 ON_Extrusion::IsClosed ( int ) const

virtual

Reimplemented from ON_Surface.

bool ON_Extrusion::IsContinuous	(	ON::continuity	c,
		double	s,
		double	t,
		int *	hint = `NULL`,
		double	point_tolerance = `ON_ZERO_TOLERANCE`,
		double	d1_tolerance = `ON_ZERO_TOLERANCE`,
		double	d2_tolerance = `ON_ZERO_TOLERANCE`,
		double	cos_angle_tolerance = `ON_DEFAULT_ANGLE_TOLERANCE_COSINE`,
		double	curvature_tolerance = `ON_SQRT_EPSILON`
	)		const

virtual

Reimplemented from ON_Surface.

ISO ON_Extrusion::IsIsoparametric	(	const ON_Curve &	curve,
		const ON_Interval *	curve_domain = `NULL`
	)		const

virtual

Reimplemented from ON_Surface.

ISO ON_Extrusion::IsIsoparametric ( const ON_BoundingBox & bbox ) const

virtual

Reimplemented from ON_Surface.

int ON_Extrusion::IsMitered ( ) const

ON_Curve* ON_Extrusion::IsoCurve	(	int	dir,
		double	c
	)		const

virtual

Reimplemented from ON_Surface.

ON_BOOL32 ON_Extrusion::IsPeriodic ( int ) const

virtual

Reimplemented from ON_Surface.

ON_BOOL32 ON_Extrusion::IsPlanar	(	ON_Plane *	plane = `NULL`,
		double	tolerance = `ON_ZERO_TOLERANCE`
	)		const

virtual

Reimplemented from ON_Surface.

bool ON_Extrusion::IsSolid ( ) const

Reimplemented from ON_Surface.

ON_BOOL32 ON_Extrusion::IsValid ( ON_TextLog * text_log = NULL ) const

virtual

Implements ON_Object.

static bool ON_Extrusion::IsValidPolyCurveProfile	(	const ON_PolyCurve &	polycurve,
		ON_TextLog *	text_log = `0`
	)

static

ON::object_type ON_Extrusion::ObjectType ( ) const

virtual

Reimplemented from ON_Surface.

ON_Extrusion& ON_Extrusion::operator= ( const ON_Extrusion & )

ON_3dPoint ON_Extrusion::PathEnd ( ) const

ON_LineCurve* ON_Extrusion::PathLineCurve ( ON_LineCurve * line_curve ) const

int ON_Extrusion::PathParameter ( ) const

ON_3dPoint ON_Extrusion::PathStart ( ) const

ON_3dVector ON_Extrusion::PathTangent ( ) const

static ON_Extrusion* ON_Extrusion::Pipe	(	const ON_Cylinder &	cylinder,
		double	other_radius,
		bool	bCapBottom,
		bool	bCapTop,
		ON_Extrusion *	extrusion = `0`
	)

static

const ON_PolyCurve* ON_Extrusion::PolyProfile ( ) const

const ON_Curve* ON_Extrusion::Profile ( int profile_index ) const

ON_Curve* ON_Extrusion::Profile3d	(	int	profile_index,
		double	s
	)		const

ON_Curve* ON_Extrusion::Profile3d ( ON_COMPONENT_INDEX ci ) const

int ON_Extrusion::ProfileCount ( ) const

int ON_Extrusion::ProfileIndex ( double profile_parameter ) const

bool ON_Extrusion::ProfileIsKinked ( int profile_index ) const

int ON_Extrusion::ProfileParameter ( ) const

int ON_Extrusion::ProfileSmoothSegmentCount ( int profile_index ) const

ON_BOOL32 ON_Extrusion::Read ( ON_BinaryArchive & binary_archive )

virtual

Reimplemented from ON_Object.

ON_BOOL32 ON_Extrusion::Reverse ( int dir )

virtual

Implements ON_Surface.

ON_BOOL32 ON_Extrusion::SetDomain	(	int	dir,
		double	t0,
		double	t1
	)

virtual

Reimplemented from ON_Surface.

bool ON_Extrusion::SetMiterPlaneNormal	(	ON_3dVector	N,
		int	end
	)

bool ON_Extrusion::SetOuterProfile	(	ON_Curve *	outer_profile,
		bool	bCap
	)

bool ON_Extrusion::SetPath	(	ON_3dPoint	A,
		ON_3dPoint	B
	)

bool ON_Extrusion::SetPathAndUp	(	ON_3dPoint	A,
		ON_3dPoint	B,
		ON_3dVector	up
	)

unsigned int ON_Extrusion::SizeOf ( ) const

virtual

Reimplemented from ON_Surface.

int ON_Extrusion::SpanCount ( int dir ) const

virtual

Implements ON_Surface.

ON_BOOL32 ON_Extrusion::Split	(	int	dir,
		double	c,
		ON_Surface *&	west_or_south_side,
		ON_Surface *&	east_or_north_side
	)		const

virtual

Reimplemented from ON_Surface.

ON_SumSurface* ON_Extrusion::SumSurfaceForm ( ON_SumSurface * sum_surface ) const

ON_BOOL32 ON_Extrusion::Transform ( const ON_Xform & xform )

virtual

Reimplemented from ON_Geometry.

ON_BOOL32 ON_Extrusion::Transpose ( )

virtual

Implements ON_Surface.

ON_BOOL32 ON_Extrusion::Trim	(	int	dir,
		const ON_Interval &	domain
	)

virtual

Reimplemented from ON_Surface.

ON_Curve* ON_Extrusion::WallEdge ( ON_COMPONENT_INDEX ci ) const

ON_Surface* ON_Extrusion::WallSurface ( ON_COMPONENT_INDEX ci ) const

ON_BOOL32 ON_Extrusion::Write ( ON_BinaryArchive & binary_archive ) const

virtual

Reimplemented from ON_Object.

Member Data Documentation

bool ON_Extrusion::m_bCap[2]

Definition at line 768 of file opennurbs_beam.h.

bool ON_Extrusion::m_bHaveN[2]

Definition at line 778 of file opennurbs_beam.h.

bool ON_Extrusion::m_bTransposed

Definition at line 783 of file opennurbs_beam.h.

ON_3dVector ON_Extrusion::m_N[2]

Definition at line 779 of file opennurbs_beam.h.

const double ON_Extrusion::m_Nz_min

static

Definition at line 787 of file opennurbs_beam.h.

ON_Line ON_Extrusion::m_path

Definition at line 741 of file opennurbs_beam.h.

ON_Interval ON_Extrusion::m_path_domain

Definition at line 782 of file opennurbs_beam.h.

const double ON_Extrusion::m_path_length_min

static

Definition at line 791 of file opennurbs_beam.h.

ON_Curve* ON_Extrusion::m_profile

Definition at line 763 of file opennurbs_beam.h.

int ON_Extrusion::m_profile_count

Definition at line 762 of file opennurbs_beam.h.

ON_Interval ON_Extrusion::m_t

Definition at line 742 of file opennurbs_beam.h.

ON_3dVector ON_Extrusion::m_up

Definition at line 743 of file opennurbs_beam.h.

The documentation for this class was generated from the following file:

/tmp/buildd/pcl-1.7.2/surface/include/pcl/surface/3rdparty/opennurbs/opennurbs_beam.h

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation